Mikroe MIKROE-3466 Pressure 12 Click
Mikroe MIKROE-3466 Pressure 12 Click is a barometric gauge pressure measuring board, equipped with the Amplified Basic Pressure sensor series (ABP). The series features a ratiometric analog output, which is proportional to the applied pressure. The Clik features a very low Total Error Band of 1.5% of FS, a specification used to describe all the measurement errors and deviations within the sensor itself. The ABP series sensor uses a calibrated and thermally compensated ASIC. This provides a ratiometric output updated at a frequency of 1kHz. It can be directly used by the A/D conversion section of the host MCU. It can also be directly used in a control feedback loop, for low latency operations.
Features
On-board modules: ABPLLNN600MGAA3, by HoneywellLow error margin of 1.5% across the full-scale span (including errors caused by the offset, hysteresis, non-linearity, and other factors…)Excellent long-term stabilityLow power consumption
Applications
Perfect for the development and prototyping of many different applications based on the gauge pressure measurement, including HVAC systems, pneumatic control, and regulation, air/gas pressure monitoring, but also some low-power IoT applications, such as weather IoT nodes, and similar
Mikroe Newest
Mikroe 13DOF 2 Click is an advanced 13-axis motion tracking board which uses two different onboard sensor ICs.
Date: 2019-09-17Mikroe Thermo 13 Click is equipped with a sensor IC that digitizes temperature measurements between -30°C and +95°C.
Date: 2019-09-17Mikroe Remote Temp Click features the Microchip EMC1833 IC capable of measuring remote temperature.
Date: 2019-09-17Mikroe Ambient 3 Click is a calibrated XYZ chromatic smart lighting director, that provides measurement data in a digital format over an I2C interface.
Date: 2019-09-17Mikroe Silent Step 3 Click is an integrated bipolar step motor driver solution with features that allow for smooth and silent operation.
Date: 2019-09-17Mikroe Buck 12 Click is a high-efficiency step-down converter which provides 3.3V on its output.
Date: 2019-09-11Mikroe MIKROE-3683 eINK Click is used to interface a compatible eINK display with a host MCU.
Date: 2019-09-11Mikroe MIKROE-3634 Opto Encoder 2 Click Board is a linear incremental optical sensor/encoder click board used for movement or rotation encoding. Now available at Mouser.
Date: 2019-09-11